Design & Reuse
arrow A/D Converter (ADC) (521)
arrow Amplifier (102)
arrow Analog Comparator (16)
arrow Analog Filter (27)
arrow Analog Front Ends (38)
arrow Analog Multiplexer (3)
arrow Analog Subsystems (4)
arrow Clock Synthesizer (83)
arrow Coder/Decoder (CODEC) (107)
arrow D/A Converter (DAC) (217)
arrow DC-DC Converter (67)
arrow DLL (743)
arrow Graphics & Video Modules (5)
arrow Oscillator (337)
arrow Oversampling Modulator (8)
arrow PLL (1723)
arrow Power Management (834)
arrow RF Modules (81)
arrow Sensor (32)
arrow Sensors and Monitors (53)
arrow Switched Cap Filter (1)
arrow Temperature Sensor (133)
arrow Other (497)
98 IP
51
0.0
4.25V...15V to 3.3V/120mA LDO
4.25V...15V to 3.3V/120mA LDO...
52
0.0
1.2V->0.8V Low/Ultra-low Power LDO Comparator IP Core
A 1.2V->0.8V Low/Ultra-low Power LDO Comparator (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 0.8 volts...
53
0.0
4.2V->3.3V Low/Ultra-low Power LDO IP Core
A 4.2V -> 3.3V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 3.3 volts from a 4.2-volt in...
54
0.0
3.3V - >1.2V/1.1V/0.9V Low Power Cap-less LDO IP Core
A 3.3V - >1.2V/1.1V/0.9V Low Power Cap-less LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 0.9 volts...
55
0.0
3.3V ->1.1V/0.9V Cap-less LDO IP Core
A 3.3V -> 1.1V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 1.1 volts from a 3.3-volt in...
56
0.0
3.3V- >1.2/1.1V/0.9V Ultra-low Power LDO IP Core
A 3.3V->1.2V/1.0V/0.8V Low/Ultra-low Power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 0.8 volts ...
57
0.0
3.3V->1.1V/0.9V/0.8V Low/Ultra-low Power LDO IP Core
A 3.3V -> 1.1V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 1.1 volts from a 3.3-volt in...
58
0.0
3.3V->1.2V/1.0V/0.8V Low/Ultra-low Power LDO IP Core
A 3.3V->1.2V/1.0V/0.8V Low/Ultra-low Power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 0.8 volts ...
59
0.0
3.3V->1.5V Cap-less LDO IP Core
A 3.3V->1.5V Cap-less LDO LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 1.5 volts from a 3.3-volt i...
60
0.0
3.3V->1.5V Low Power LDO IP Core
A 3.3V->1.5V Low Power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 1.5 volts from a 3.3-volt inpu...
61
0.0
3.3V->1.8V/1.2V Low/Ultra-low Power LDO IP Core
A 3.3V->1.8V/1.2V Low/Ultra-low Power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 1.2 volts from ...
62
0.0
3.3V->2.5V Low/Ultra-low Power LDO IP Core
A 3.3V->2.5V Low/Ultra-low Power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 2.5 volts from a 3.3...
63
0.0
1.8V->0.8V Low Power LDO IP Core
A 1.8V -> 0.8V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 0.8 volts from a 1.8-volt in...
64
0.0
1.8V->1.2V Low/Ultra-low Power LDO IP Core
A 1.8V->1.2V Low/Ultra-low Power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 1.2 volts from a 1.8...
65
0.0
20 mA LDO voltage regulator (output voltage 1.1V/1.2V/1.3V/1.4V)
055TSMC_LDO_09 IP is cap-based LDO voltage regulator designed to convert IO voltage 2.5V to 1.2V and supply analogy circuits with load up to 20mA. The...
66
0.0
100nA Ultra-low Power LDO in 110nm~12nm
The LDO IP supports various input voltage ranges include 1.90V~3.60V, 1.90V~5.50V and so on. The typical output voltage of this LDO can be configratio...
67
0.0
10mA 10Ghz BW Capless
A 10mA 10GHz BW capless LDO (Low Drop-Out) is a type of voltage regulator that is designed to provide a stable output voltage with a low voltage drop ...
68
0.0
20mA 10Ghz BW capless
20mA 10GHz BW capless IP core is a digital circuit block that provides a capless Low Drop-Out (LDO) voltage regulator function. It is designed to be i...
69
0.0
20mA and 500mA LDO voltage regulators (output voltage 2.5V)
055TSMC_LDO_06 is a cap-based LDO voltage regulator designed to supply integrated circuits with stable and precise voltage. 2.5V. The LDO converts IO ...
70
0.0
50mA LDO voltage regulator (output voltage 0 to 1.8 V)
250iHP_LDO_05 is LDO to convert voltage 1.9V÷2.7V to 0V÷1.8V and designed to supply integrated circuits with stable and precise voltage with load up t...
71
0.0
20mA low noise LDO voltage regulator (output voltage 1.1V/1.2V/1.3V/1.4V)
055TSMC_LDO_08 IP is low noise cap-based LDO voltage regulator designed to convert IO voltage 2.5V to 1.2V and supply analogy circuits with load up to...
72
0.0
80nA Ultra-low Power LDO in 110nm~12nm
This LDO IP supports various input voltage ranges include 1.90V~3.60V, 1.90V~5.50V and so on. The typical output voltage of this LDO can be configrati...
73
0.0
DCDC regu power stage, includes bootstrap regulator
DCDC regu power stage, includes bootstrap regulator...
74
0.0
Ultra Low Power 5V/4.2V->3.3V LDO IP Core
A 5V -> 3.3V Ultra low-power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 3.3 volts from a 5-volt ...
75
0.0
3mA LDO voltage regulator (1.3V – 3.6V to 1.2V/1.3V/1.5V/1.65V)
130GF_LDO_01 is a capacitor-less regulator designed to supply integrated circuits with stable and precise voltage. The LDO inputs voltage VDD 1.3… 3...
76
0.0
Voltage Regulator 1V to 0.8V
Noise @ 1MHz offset=12nV/Sqrt(Hz), IDD=640uA...
77
0.0
Voltage regulator 5V->1.5V Low/Ultra-low Power LDO IP Core
A 5V -> 1.5V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 1.5 volts from a 5-volt input ...
78
0.0
Low Dropout (LDO) Capless Regulator
The ODT-LDO-IC-300M-7 is a low dropout (LDO), linear regulator for integration in a SoC. The LDO uses advanced control techniques to achieve excellent...
79
0.0
Low Noise, High PSRR Replica Voltage Regulator
The WEALDO18NI12SFN32M22G is a voltage regulator operating from 1.8 V. It provides three output voltages 1.2 V driving output load that sinks specific...
80
0.0
Low Noise, High PSRR, Replica LDO
The WEALDORP18NI12RRSP22M22G is a voltage regulator operating from 1.8 V voltage supply. The WEALDO18NI12SFN12M22G provides one output voltage 1.2 V d...
81
0.0
Low Noise, High PSRR, Replica LDO
The WEALDORP1812NI8SFN12M22G is a low-dropout regulator LDO with voltage supplies 1.8 V and 1.2 V. The WEALDORP1812NI8SFN12M22G gives one output volta...
82
0.0
Low Noise, High PSRR, Replica LDO
The WEALDORP1812NI08SFN22M22G is a voltage regulator operating from 1.8 V and 1.2 V power supplies. The WEALDORP1812NI08SFN22M22G provides two 0.8 V...
83
0.0
Low Noise, High PSRR, Replica LDO
The WEALDORP1812NI08SFN42M22G is a voltage regulator operating from 1.8 V and 1.2 V power supplies. The WEALDORP1812NI08SFN42M22G provides four 0.8...
84
0.0
Low Noise, High PSRR, Replica LDO
The WEALDOLR18NI2SFN42M22G is a voltage regulator operating from 1.8 V. It provides four output voltages 1.2 V driving output load that sinks specific...
85
0.0
Low Noise, High PSRR, Replica LDO
The WEALDOLR18NI2SFN42M22G is a voltage regulator operating from 1.8 V. It provides four output voltages 1.2 V driving output load that sinks specific...
86
0.0
Low Power 30mA 10Ghz BW capless IP Core
A 30mA 10GHz BW capless LDO (Low Drop-Out) is a type of voltage regulator that is designed to provide a stable output voltage with a low voltage drop ...
87
0.0
Low Power 5V - > 1.8V Cap-less LDO IP Core
A 5V -> 1.8V low-power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 1.8 volts from a 5-volt input ...
88
0.0
Low Power 5V->2.4V Low noise LDO IP core
A 5V -> 2.4V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 2.4 volts from a 5-volt input ...
89
0.0
Low Power 5V->3.0V Cap-less LDO IP Core
A 5V -> 3.3V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 3.3 volts from a 5 volt input ...
90
0.0
Low-noise Regulator for VCO 1V to 0.8V
Noise @ 1MHz offset=2.5nV/Sqrt(Hz), IDD=12mA...
91
0.0
Power Management Unit
PMU IP includes following components: Bandgap reference voltage source and reference current sources. Bandgap source forms temperature, power supply a...
92
0.0
Power Management Unit (2.3 - 3.0V output voltage, load current 20mA)
130iHP_PMU_01 is designed to form stabilized voltage with overcurrent indication (bit OVC). The block has configurable output voltage (2.3 / 2.4 / 2.5...
93
0.0
5V- > 3.3V Low/Ultra-low Power LDO IP Core
A 5V -> 3.3V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 3.3 volts from a 5 volt input ...
94
0.0
5V- >1.1V/0.9V Low/Ultra-low Power LDO IP Core
A 5V -> 1.1V/0.9V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 0.9 volts from a 5-volt i...
95
0.0
5V->1.2V Low/Ultra-low Power LDO IP Core
A 5V -> 1.2 V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 1.2 volts from a 5-volt input...
96
0.0
5V->1.5V Cap-less Ultra-low Power LDO IP Core
A 5V -> 1.5V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 1.5 volts from a 5-volt input ...
97
0.0
5V->2.4V LDO with 50ppm/°C Temperature coefficient IP Core
A 5V -> 2.4V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 2.4 volts from a 5-volt input ...
98
0.0
5V/4.2V ->1.8V Low/Ultra-low Power LDO IP Core
A 5V/4.2V -> 1.8V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 1.8 volts from a 5V-volt ...